E mere ụdị Mag-11 usoro clamp flowmeter electromagnetic flowmeter maka ojiji dị ọcha. E ji ígwè anaghị agba nchara mee ihe mmetụta ụdị clamped ahụ, ihe mkpuchi ahụ bụkwa FEP / PFA, nke nwere ike imezu ihe achọrọ maka hygeian nke mkpuchi ahụ, nke a na-ejikarị eme ihe na nri, ihe ọṅụṅụ, ọgwụ na ụlọ ọrụ ndị ọzọ. Usoro a na-achọkarị nhicha na ọgwụ nje mgbe niile, iji mee ka ọ dị mfe ịgbasa, a na-ejikarị njikọ nke njikọ clamp na paịpụ nnwale eme ihe. Enwere ụdị dị obere ma dị anya.
atụmatụ
Enweghị akụkụ na-agagharị agagharị na enweghị mfu nrụgide
Ezigbo izi ezi nke ±0.5% uru nke ịgụ ihe
Ejiri ígwè anaghị agba nchara 304 mee ya
Tụọ usoro ntụgharị ihu na nke azụ.
Ọtụtụ ụzọ nkwukọrịta, dịka 4-20mA, RS485 Modbus, Pulse na Hart
E nwere ọkpọkọ DN10-80
FEP na PFA mkpuchi bụ nhọrọ
Enwere ike ịlele mmiri dị iche iche na-eduzi (conductivity ＞5uS/cm)
Nkọwapụta
Ihe Ntụgharị:
| Ngosipụta | Ngosipụta LCD Bekee nke nwere ahịrị anọ, na-egosipụta data nke mmiri na-aga n'ihu na nke na-aga n'ihu, pasent nke mmiri na-aga n'ihu na ọsọ mmiri. |
| Ntọala paramita | Ịtọ ntọala paramita site na iji bọtịnụ, njikwa dịpụrụ adịpụ na Bluetooth (ekwentị smart). |
| Asụsụ | Asụsụ Chaịna, Bekee; Nwere ike ịhazi asụsụ Chinese ọdịnala, Spanish, na Korean |
| Mbupụta Ugbu a | 4-20mA, Nguzogide Ibu ≤ 500Ω(gụnyere ike iguzogide eriri), Hart |
| PIO | Nwere ike ịhọrọ mmepụta pulse na-anaghị arụ ọrụ, mmepụta pulse na-arụ ọrụ, mmepụta state/mgbati na ntinye akara kọntaktị. |
| Mmepụta Pulse Na-anaghị Eme Ihe: 30VDC (Gbanyụọ), 200mA (Gbanyụọ); 0.0001-5000Hz; Obosara Pulse: okirikiri ọrụ 50% ma ọ bụ uru edobere (≤100ms) | |
| Mmepụta Pulse Na-arụ Ọrụ: 0.0001-2000Hz, ≤150mA, 15VDC ±20%; Obosara Pulse: ≤100ms (Uru ndabara: 20ms) | |
| Mmalite Steeti/Mkpọtụ: Ike kọntaktị: 30VDC (Gbanyụọ), 200mA (Gbanyụọ) | |
| Ntinye kọntaktị: kọntaktị na-anaghị arụ ọrụ, Nguzogide ibu: emechiri ≤ 200Ω, akwụsịtụla ≥100kΩ | |
| Nkwurịta okwu | RS485 (MODBUS-RTU),BACNET, HART |
| Ịnye ọkụ | 220VAC50Hz/60Hz,24VDC, 100-240VAC |
| Mkpu mkpu | Mkpu ọkpọkọ efu, mkpu azụ, mkpu oke elu na mkpu oke ala |
| Klas nchekwa | IP65, IP67 |
| Izi ezi | 0.5%, 0.3%, 0.2% |
| Ihe na-egbochi mgbawa | Exia/db II CT3 ~ T6 Ga / Gb Ex tb III CT 200℃ Db |
| Ọdịdị | Obere ma ọ bụ nke dịpụrụ adịpụ |
Sensọ:
| Dayameta | DN10-DN80 |
| Ihe electrode | SS316L |
| Ihe mkpuchi | FEP, PFA |
| Ihe mkpuchi | Ígwè anaghị agba nchara (304,316,316L) |
| Paịpụ mmiri mmiri dị mkpụmkpụ | Ihe: 316L; Ọkọlọtọ njide: DIN32676 ma ọ bụ ISO2852 |
| Oke okpomọkụ | -40°C~+140°C |
| Klas nchekwa | IP65, IP67, IP68 |
| njikọ | Ihe 304, ọkọlọtọ njide: DIN32676, ISO2852, 3A |
| Nrụgide ọrụ kachasị elu | 1.6Mpa |
Akụkụ
| Dayameta mm | Nha ahụ mm | F Mpụta Dayameta nke Chuck | ||||
| L | D | H | DIN32676 | ISO2852 | 3A | |
| 10 |
150 |
84 |
125.5 | 34 | 34 | 25 |
| 15 | 34 | 34 | 25 | |||
| 20 | 34 | / | / | |||
| 25 | 50.5 | 50.5 | 50.5 | |||
| 32 | 93 | 134.5 | 50.5 | 50.5 | / | |
| 40 | 99 | 140.5 | 50.5 | 50.5 | 50.5 | |
| 50 | 112 | 153.5 | 64 | 64 | 64 | |
| 65 | 200 | 125 | 166.5 | 91 | 77.5 | 77.5 |
| 80 | 137 | 178.5 | 106 | 91 | 91 | |
Nhọrọ Ihe Elektrọd
| ihe | Koodu | Arụmọrụ nke Nguzogide Nrụrụ |
| 316L | V | A na-eji ya eme ihe na mmiri ụlọ ọrụ mmepụta ihe, mmiri ụlọ, mmiri nsị, ihe ngwọta na-anọpụ iche na acid na-adịghị ike dịka carbonic acid na acetic acid. |
| Hastelloy Alloy C | Hc | Acid nke na-eguzogide oxidation, dịka nitric acid, ngwakọta acid, mgbagwoju anya agwakọtara ya na sulfuric acid. Nwere ezigbo nchara iguzogide mmiri oké osimiri, ngwọta alkaline na ngwọta chloride. A naghị eji ya eme ihe na: hydrochloric acid na hydrofluoric acid |
| Hastelloy Alloy B | Hb | O nwere ezigbo nguzogide nchara na acid, alkaline, na nnu nke na-abụghị oxidative. A naghị eji ya eme ihe: nitric acid. |
| Ti | Ti | Nwere ezigbo nguzogide nchara megide mmiri oké osimiri, chloride, hypochlorite na ọtụtụ hydroxides dị iche iche. A naghị eji ya eme ihe: ibelata asịd dịka hydrochloric acid, sulfuric acid, hydrofluoric acid. |
| Ta | Ta | Ọ fọrọ nke nta ka ọ nwee nguzogide nchara na ihe niile metụtara kemịkalụ, nke a na-ejikarị eme ihe maka hydrochloric acid na sulfuric acid. A naghị eji ya eme ihe: hydrofluoric acid, alkaline na fuming sulfuric acid. |
| Tungsten Carbide | W | Nwere ezigbo nguzogide iyi, ejiri ya maka ihe eji eyi ihe dịka apịtị na akwụkwọ, mana ọ naghị eguzogide nchara. |
| Alloy nke Platinum-iridium | Pt | E wezụga aqua acid na nnu ammonium, ha fọrọ nke nta ka ha nwee ike iguzogide nchacha acid, alkaline na nnu niile. |
Nhọrọ Ihe Mkpuchi
1. Maka mgbasa ozi okpomọkụ dị elu (≥140℃), nhọrọ maka mkpuchi PFA.
2. Maka mgbasa ozi nwere mkpa maka ịdị ọcha, ị kwesịrị ịhọrọ ihe mkpuchi FEP
3. Maka ihe ndị yiri ya dịka slurry na pulp, ị kwesịrị ịhọrọ ihe mkpuchi FEP.
4. Maka ihe dị mfe ịkpụ dịka akwụkwọ pulp, mmasị maka FEP ma ọ bụ PFA lining.
5. Ọ bụrụ na nrụgide adịghị mma, ị kwesịrị ịhọrọ FEP.
| ihe | Arụmọrụ nke Nguzogide Nrụrụ | Na-arụ ọrụOkpomọkụ | Oke dị mkpa | Dayameta(mm) |
| FEP | Nguzogide nchara dị ka PTFE. | -40 ~150℃ | Mmiri mmiri niile ewezuga ihe mkpuchi yiri ya dịka ngwa agha. | DN3-400 |
| PFA | Nwee ike iguzogide nchara na ihe niile metụtara kemịkalụ. Ike iguzogide okpomọkụ ka mma karịa FEP. | -40~180℃ | Dịka PTFE, mmasị maka okpomọkụ dị elu na-adịgide adịgide. | DN3-400 |
Oke Ntụle Mmiri Na-asọ
A ga-anwale mita mmiri elektrọnik anyị ọ bụla site na nhazi siri ike tupu ịpụ n'ụlọ ọrụ mmepụta ihe. Ya mere, mgbe ị họọrọ oke nha, emegidela ihe dị mkpa nke bụ "oke mmiri ga-adị ukwuu karịa oke mmiri a tụrụ", ọ ka mma maka oke mmiri dị nso na oke mmiri a tụrụ. N'ozuzu, mee ka oke mmiri a tụrụ n'etiti 50% ruo 80%.
Enwere ike ịgbanwe usoro nha nke mita electromagnetic usoro Mag dịka ọnọdụ ahụ si dị.
Ọsọ kachasị elu nwere ike iru 12m/s.
| Dayameta(mm)(DN) Usoro nha (m)3/h) | |||||||||||||||
| 10 | 0.1 | 0.16 | 0.2 | 0.25 | 0.3 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 2.8 |
| 15 | 0.2 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 6.3 |
| 20 | 0.4 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 11.3 |
| 25 | 0.6 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 17.7 |
| 32 | 0.9 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 28 |
| 40 | 1.4 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 45 |
| 50 | 2.1 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 70 |
| 65 | 4 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 |
| 80 | 6 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 180 |
| 100 | 8 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 280 |
| 125 | 13 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | narị anọ | 440 |
| 150 | 19 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | narị anọ | 500 | narị isii | 630 |
| 200 | 34 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | narị anọ | 500 | narị isii | narị asatọ | 1000 | 1100 |
| 250 | 53 | 100 | 120 | 160 | 200 | 250 | 300 | narị anọ | 500 | narị isii | narị asatọ | 1000 | 1200 | 1400 | 1600 |
| 300 | 76 | 160 | 200 | 250 | 300 | narị anọ | 500 | narị isii | narị asatọ | 1000 | 1200 | 1600 | 1800 | 2000 | 2500 |
Rịba ama nke 1: Mpaghara Okpukpo bụ usoro anyị tụrụ aro.
Rịba ama nke 2: Usoro maka ọsọ na ọsọ: V= 354 x F / D2(V: Ọsọ ọsọ, m/s, F: Ọsọ ọsọ, m3/h, D: Dayameta, mm)
